How to Fix Wi-Fi Connected But No Internet on Windows 11

Seeing your Wi-Fi connected but having no internet access in Windows 11 can be frustrating, especially when other devices on the same network are working fine. In this situation, Windows shows a connected status, but websites fail to load and apps that require internet access stop working.

This issue is usually caused by incorrect network configuration, DNS problems, corrupted network cache, outdated drivers, or conflicts between Windows network services and the router. In many cases, the Wi-Fi hardware itself is functioning correctly, but Windows is unable to route traffic to the internet.

Fixing the “Wi-Fi connected but no internet” issue in Windows 11 involves resetting network components, correcting IP and DNS settings, and ensuring drivers and services are working properly. The steps below explain how to restore full internet connectivity.

How to Fix Wi-Fi Connected But No Internet on Windows 11

The methods in this section focus on resolving IP configuration errors, DNS failures, and Windows network service issues that commonly cause this problem. Apply each method carefully and test your internet connection after completing a step.

Restart the system where instructed so changes take effect properly.

1. Restart the Computer and Router

Temporary network glitches can block internet access.

1. Restart your Windows 11 computer.
2. Power off the router and modem.
3. Wait at least 30 seconds.
4. Turn the modem on first, then the router.
5. Reconnect to the Wi-Fi network.

This refreshes both local and network-side connections.

2. Run the Windows Network Troubleshooter

Windows can automatically fix common connectivity issues.

1. Open Settings.
2. Go to System.
3. Select Troubleshoot.
4. Click Other troubleshooters.
5. Run Internet Connections.
6. Apply any recommended fixes.

This resolves basic misconfigurations automatically.

3. Disable and Re-Enable the Wi-Fi Adapter

Refreshing the adapter clears internal errors.

1. Press Windows + R, type ncpa.cpl, and press Enter.
2. Right-click your Wi-Fi adapter.
3. Select Disable.
4. Wait a few seconds.
5. Right-click it again and select Enable.

This restarts the wireless network interface.

4. Forget and Reconnect to the Wi-Fi Network

Corrupted network profiles can cause no-internet issues.

1. Open Settings.
2. Go to Network & internet.
3. Select Wi-Fi.
4. Click Manage known networks.
5. Choose the connected Wi-Fi network.
6. Click Forget.
7. Reconnect by entering the Wi-Fi password again.

Recreating the profile fixes authentication and routing issues.

5. Reset TCP/IP and Network Cache

Corrupted network cache can block internet access.

1. Open Terminal (Admin).
2. Run the following commands one by one: ipconfig /release
ipconfig /flushdns
ipconfig /renew
netsh winsock reset
3. Restart the computer.

This fully resets Windows networking components.

6. Change DNS Server Settings

DNS failures often cause “no internet” symptoms.

1. Open Settings.
2. Go to Network & internet.
3. Select Wi-Fi > Hardware properties.
4. Click Edit next to DNS server assignment.
5. Choose Manual.
6. Enable IPv4.
7. Set DNS servers to:
   • Preferred: 8.8.8.8
   • Alternate: 8.8.4.4
8. Save changes and reconnect.

Using public DNS servers bypasses ISP DNS issues.

7. Disable Proxy and VPN Connections

Proxies and VPNs can block normal internet routing.

1. Open Settings.
2. Go to Network & internet.
3. Select Proxy.
4. Turn off Use a proxy server.
5. Disable or uninstall any active VPN software.
6. Restart the system.

This restores direct internet access.

8. Update or Reinstall Wi-Fi Drivers

Outdated drivers can cause connectivity failures.

1. Press Windows + X and select Device Manager.
2. Expand Network adapters.
3. Right-click your Wi-Fi adapter.
4. Select Update driver.
5. Choose Search automatically for drivers.
6. Install updates and restart.

If updating fails, uninstall the driver and restart to reinstall it automatically.

9. Check IP Address Configuration

Invalid IP assignments can block internet access.

1. Open Terminal (Admin).
2. Run:
   ipconfig
3. Ensure your Wi-Fi adapter has a valid IPv4 address.
4. If the address starts with 169.254, the router is not assigning an IP.

In this case, restarting the router or resetting network settings is required.

10. Reset Network Settings Completely

This restores all network components to default.

1. Open Settings.
2. Go to Network & internet.
3. Select Advanced network settings.
4. Click Network reset.
5. Confirm and restart the computer.

This reinstalls all network adapters and clears conflicts.

Final Thoughts

Wi-Fi connected but no internet in Windows 11 is usually caused by DNS issues, corrupted network cache, driver problems, or incorrect IP configuration rather than a hardware failure. By resetting network components, changing DNS settings, and updating drivers, most users can restore internet access quickly.